|
1266 Sepex Controller |
Product Summary |
|
D E S C R I P T I O N Curtis PMC Model 1266 SepEx® controllers are programmable and microprocessor based, with an advanced MOSFET power section for smooth and seamless control of separately excited motors.
Q U A L I T Y C O M P L I A N C E Manufactured under ISO 9001 certified Quality Management System. UL Recognized Component Status. MODEL 1266 SepEx® A P P L I C AT I O N Curtis PMC 1266 SepEx® controllers are designed for use in two passenger golf/utility vehicles. |
|
F E A T U R E S • Power MOSFET technology provides smooth, silent, efficient, and cost-effective operation. • Adjustable parameters enable custom optimization of speed, torque, and braking control. • Half bridge armature and full bridge field provides regenerative braking down to near zero speed. • Rugged package rated at IP5X. • Over speed braking (regenerative) limits speed while driving downhill. • Walk Away™ braking feature limits any stopped or key-off rolling to very low speed. (Optional) • System uses Hall effect speed sensor on motor or drive train to control vehicle speed. • Tow switch enables free rolling for towing of vehicle. • Anti-rollback function provides improved control when throttle is released on hills. • Anti-stall function helps prevent motor commutator damage. • Controller drives warning buzzer -- steady in reverse; intermittent during Walk Away™ braking. • Multi-Mode™ input provides for two speed and power modes of operation. • Timed shutdown of main contactor after pedal is released and vehicle has stopped. • LED status indicator. • Fully compatible with 1311, 1314 and 1307 Programmers for parametric adjustment, tuning, test, and diagnostics. • Extensive fault detection and diagnostic reporting using a Curtis Programmer including (partial list): • Main contactor weld check and driver check • Throttle and wiring faults • Open or shorted motor field winding • Open motor armature winding • Over-temperature • Missing or failed speed sensor • Armature drive failure. |
